1-high brightness
2-high definition
3-high refresh rate
4-high stability
5-7 years warranty
Unique requirements of the LED display commercial advertising
The LED display for commercial advertising is customized for the company engaging in outdoor advertising, it is suitable for play commercial advertising in outdoor environment according to his basic requirements hi has the following main technical features.
1-)Demanding strong protection.
Most of the LED display for commercial advertising are operated in outdoor environment they must be working well under the extreme weather or condition therefore it must have strong ability of waterproof and protection against strong wind, thunder, lightning, high temperature, low temperature and corrosion.
2-) Long time running.
The LED display for outdoor advertising are usually running from 6 o'clock in the morning until midnight without any break.
3-) Long lifespan.
To maximize the benefit of the customers the LED display must have a long lifespan of 5 to 8 years in general or even longer.
4-) Energy Saving.
The common LED display consumes a lots of electricity if it work without good saving measures the operational cost of electricity will be very high, no advertising company would like to see that happens.
5-) High brightness.
Especially the spectator need to see the picture on the LED display clearly in sunshine from a certain distance so the brightness of the display must be high enough.
6-) wide viewing angle
To increase attraction for viewers and passersby the LED display need wide viewing angle to capture the attention of any passerby from 10 meter to 1000 meter.
7-) excellent Uniformity and stability for picture.
A lot of advertising are showed in the way of picture so the picture must be showed evenly and stably on the LED display.
8-) Well appearance for long.
The LED display must long maintain in good appearance and prevent from getting worse quickly by the effects of light decay and color fading.
Check the technical products information as below
| Item |
Discription |
BKOP25 |
| 1 |
Unit Module |
LED Style |
LED lamp DIP546 |
| 2 |
Classification |
virtual pixel Full-color |
Real Pixel Full-color |
| 3 |
Physical pixel pitch |
25mm |
25mm |
| 4 |
Pixel configuration |
2R1G1B |
2R1G1B |
| 5 |
Module Size |
200*200mm |
200*200mm |
| 6 |
Resolution of Module |
8*8 |
8*8 |
| 7 |
Power Consumption of Module |
≤ 22W |
≤ 17W |
| 8 |
Major Technology Parameter |
Physical pixel Density |
1, 600/ sq. M |
1, 600/ sq. M |
| 9 |
LED per sq. meter |
6, 400 |
6, 400 |
| 10 |
Max Power Consumption |
640W/ m 2 |
540W/ m 2 |
| 11 |
Average Power Consumption |
320 W/ m 2 |
270 W/ m 2 |
| 12 |
Resolution of cabinet |
48x40 |
48x40 |
| 13 |
Size of Cabinet |
1200*1000mm |
| 14 |
Weight of Cabinet |
65Kgwaterproof |
65Kgwaterproof |
| 15 |
Luminance of White Balance |
≥ 5, 000cd/ m 2 |
≥ 5, 000cd/ m 2 |
| 16 |
Frame of Frequency |
≥ 60Hz |
≥ 60Hz |
| 17 |
Refresh Rate |
LINSN≥ 400Hz; DPT≥ 400Hz; ZDEC≥ 1920Hz |
| 18 |
Driving Method |
Static Constant Current Driving |
| 19 |
Viewing angle |
Horizontal: ≥ 120° ; Vertical: ≥ 75° |
| 20 |
Colors |
Each color ≥ 16, 384grace |
| 21 |
Brightness adjustment |
Automatically: 256 levels for each color (R, G, B) Manually: 100 levels for each color (R, G, B) |
| 22 |
Ingress protection |
Front: IP65; Rear: IP43 |
| 23 |
Power Supplier System |
220V± 10% or 110V± 10% Can Controled by PLC |
| 24 |
Mean Time Between Failure |
> 10, 000 hours |
| 25 |
Life-span |
> 100, 000 hours |
| 26 |
Operating environment |
Temperature: -20° C-50° C; Humidity: 10%-90%RH |
| 27 |
Input Signal |
RF, S-Video etc. |
Audited Supplier 
){kind=link}
){kind=link}